Logo

C1230 BMW Fault Code

Check C1230 OBD Fault Code Reason
Description:

Variable Cam Timing Over-advanced (Bank 1) The comprehensive component monitor (CCM) monitors the VCT position for an over-advanced camshaft timing.
The test fails when the camshaft timing exceeds a maximum calibrated value or remains in an advanced position.

BMW cam timing improperly set No oil flow to the VCT piston chamber Low oil pressure VCT solenoid valve stuck closed Camshaft advance mechanism binding (VCT unit) C1230 DTC is a check of the VCT unit.

C1230 Code Symptoms :

See C1230 in engine

There are currently two main types of cylinder deactivation used today, depending on the type of engine. C1230 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.

Diagnosis And Repairing C1230

C1230 OBD 2 code on vehicles with electronically controlled automatic transmissions, the 3-4 shift solenoid is responsible for actuating the hydraulic circuits to activate clutches or bands that change gears inside the automatic transmission.

How to fix C1230 code ?

See C1230 repair manual
  • Erratic camshaft position due to low oil pressure
  • Faulty spark plug (s)
  • Damaged camshaft position (CMP) sensor
  • Ignition coils circuit poor electrical connection

Some systems require that the actuator has an adequate supply of brake fluid. Low brake fluid levels can mimic the symptoms of code C1230, so consult the manual to locate the brake fluid reservoir.

Bear in mind that a low fluid level can set code C1230 on some applications, so make sure that on fluid operated systems the fluid level is up to the mark before starting an electrical diagnosis.

BMW Cars that meet C1230 error